Flat Belt Drive Vs V Belt Drive. In flat belt drive, only one surface of the belt remains in contact with the pulleys. It cannot be used to transmit high power ;
Searcho | Industry Specific Search Engine Focussing On Hvac And Its Customers from searcho.org
Disadvantage of the flat belt drive. High cost compared to flat belt drive. High noise and low mechanical efficiency.
High Cost Compared To Flat Belt Drive.
They are bulky, for a given transmission, flat belt drive requires a wide pulley. Flat belts can be used for long distances, up to 15 m. Positive drive or synchronous belts rely on the engagement of teeth on the belt with grooves on the pulley.
Can Transfer High Power At High Speed.
High noise and low mechanical efficiency. Such a multible ribbed belt thus combines the advantages of both belt types to a special degree, i.e. Belt drives are made up of synthetic material.
In Belt Drive, Little Difficulties Have When It Gets Damaged.
Disadvantage of the flat belt drive. Low slippage and alignment problem. The flat belt cannot transmit high power as timing belt does.
L K Bhagi) 52 P1 = Belt Tension In The Tight Side (N) P2 = Belt Tension In The Loose Side (N) M = Mass Of The One Meter Length Of Belt (Kg/M) V = Belt Velocity (M/S) F = Coefficient Of Friction Α = Angle Of Wrap For Belt (Radians)
Design is easy and cheap to manufacture; Flat belts are not advisable for high outputs at high speeds. The flat belt technology is based on the high friction of the belt against the crowned belt pulleys, and the transmission only contains one belt.
A Higher Speed Is Possible In A Flat Belt Drive;
High chance of slip off. The more power that is transmitted, the more belts and grooves in a row. It used where pulleys were very near to each other.
Post a Comment for "Flat Belt Drive Vs V Belt Drive"